NTi® - 112 Allrounder

The NTI® 112 protective suit "Allrounder" was specially developed for situations that do not require fire fighting in closed rooms. Since most operations take place in the field of technical assistance (e.g. accidents or disaster relief), other requirements are placed on the operational clothing. This suit is characterised in particular by high visibility, which is achieved through the use of HI-VIS outer materials and high-contrast yellow/silver/yellow segmented reflective striping. The suit not only fulfils specific criteria for technical assistance. In addition to the TA standard EN 16689:2017, the suit also meets the EN 469:2020 performance level 1 standard, which means that the wearer is optimally protected, even in the event of external fires. In addition, the suit meets the ISO 15384:2018 standard, which means it can be worn in forest and vegetation fire scenarios without hesitation. With its versatile protection, this suit is a true "allround" talent for all outdoor operations. In terms of appearance and cut, it has been closely modelled on our internal attack models (Model 1 & Model 2) to ensure a uniform appearance in the fire service.

 

PRODUCT HIGHLIGHTS:

  • Universal applicability due to compliance with EN 469 and EN 16689 and ISO 15384 standards (EN 16689 for fluorescent yellow version)
  • Highly visible
  • Additional abrasion protection on the shoulders
  • Increased mechanical tear resistance
  • Additional cut and puncture protection in the forearm area
  • Reflective piping
  • Bacteria and virus protection
  • RFID/NFC technology, positioned behind the NTI logo
  • Suspender adjustment system with comfort quick adjuster
  • Super breathable - RET 9.6 PA/W

Please note: The suit is also available in the colour combinations black-blue-red, black-blue-orange, gold-red and gold-orange. However, without TA standard EN 16689:2017

Upper material:

Nomex Outershell Tough

Upper material colour variants:

NTi® - 112 Allrounder jacket Art No. 112-160S-66

Material

Art No.112-160S-66:

outer fabric: Nomex® (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre) + 35% modacrylic/33% viscose FR/30% aramid (Kevlar®)/2% antistatic fibre (HI-VIS fluorescent yellow)
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nonwoven, Spunlace Nomex®/Kevlar® quilted with 100% Aramid
Segmented reflective striping FR: Yellow-silver-yellow

  • colour code (01): black-blue

Article Description

  • Collars, colour-contrasting in HI-VIS fluorescent yellow
  • Napoleon pocket with fluorescent yellow zip
  • Two adjustable radio pockets (for digital and analogue equipment)
  • Lamp holder with safety catch positioned centrally for optimum light exposure
  • Adjustable arm strap
  • YKK® panic zip in fluorescent yellow, easily replaceable in the utility model-protected tunnel system
  • Inspection opening with access to membrane and insulation side on both sides
  • Segmented reflective tape, incl. reflective piping for optimal body contour recognition
  • Self-luminous back label with inscription FEUERWEHR (further inscription and second back label optional)
  • Signal Velcro fastener made of luminescent red/yellow Velcro tape; an improperly closed jacket is immediately recognisable
  • Tabs for antenna and equipment fixation
  • Two velcro straps for name tags or for tucker attachment
  • Ergonomic, pre-shaped elbow area, reinforced with silicone/ carbon/ Kevlar
  • Pockets and fasteners with non-slip trim for easy opening, even with gloves on
  • Carabiner hook
  • Suction barrier against wetness from creeping
  • Cuffs with Kevlar reinforcement at the sleeve hem and thumb loop

Standards/dimension tables/declarations of conformity

  • EN 469:2020 Section 6.2.6 + Performance level X1 Y2 Z2
  • EN 16689:2017, Protective clothing for technical assistance
  • ISO 15384:2018 + Amd. 1:2021-09, Protective clothing for firefighting in open areas
  • EN 1149-5:2018, Electrostatic properties
  • EN ISO 11612:2015, PPE for work exposed to heat
  • EN ISO 14116:2015, Protection against flames, materials, combination of materials and clothing with limited flame spread
  • EN 343:2019, Protection against rain
  • EN ISO 388:2017 + EN ISO 13997, Partial test against mechanical risks, i.e. resistance to cuts and sharp objects
  • EN ISO 13688:2013, Protective clothing - General requirements
  • EN ISO 22610 + 22612, Protection against germs bacteria (tested when new)
  • ISO 16604, Protection against viruses

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44-L66/68

Care instructions

before and after washing instrcutions:

  • close zips, Velcro and button fasteners
  • empty and close pockets
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if the outer fabric is dark blue, use detergent for black clothes, if available)
  • do not use fabric softener
  • rinse out any detergent residues well
  • air dry if possible
  • do not staple on labels
  • re-impregnation (hydrophobic treatment recommended after every 5th wash (turn the garment inside out for this)

care symbols:

  • washing: gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • bleaching: bleaching not possible
  • drying: drying with reduced thermal stress
  • ironing: iron at moderate heat at 150°C (2 points) to refresh the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • dry cleaning: gentle cleaning with perchlorethylene

NTi® - 112 Allrounder trousers Art No. 112-164S-66

Material

Art No.112-164S-66:
outer fabric: Nomex® (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre) + 35% modacrylic/33% viscose FR/30% aramid (Kevlar®)/2% antistatic fibre (HI-VIS fluorescent yellow)
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nonwoven, Spunlace Nomex®/Kevlar® quilted with 100% Aramid
Segmented reflective striping FR: Yellow-silver-yellow
  • Farbcode (66): black-blue-luminescent-yellow

Article Description

  • NTI® 112 trouser strap adjustment system with comfort quick adjustment.
  • Luminous yellow flaps for easy opening of the side pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-shaped knee area, reinforced with silicone/ carbon/ Kevlar
  • Suction barrier against wetness from creeping
  • Inspection opening with access to membrane and insulation side on both sides
  • Waistband closure with Velcro and zip
  • Two side pockets with pocket pouch
  • Knee pads FR, waterproof and replaceable
  • Segmented reflective striping, incl. reflective piping for optimal body contour recognition
  • Step recess with abrasion protection

Standards/dimension tables/declarations of conformity

  • EN 469:2020 Section 6.2.6 + Performance level X1 Y2 Z2
  • EN 16689:2017, Protective clothing for technical assistance
  • ISO 15384:2018 + Amd. 1:2021-09, Protective clothing for firefighting in open areas
  • EN 1149-5:2018, Electrostatic properties
  • EN ISO 11612:2015, PPE for work exposed to heat
  • EN ISO 14116:2015, Protection against flames, materials, combination of materials and clothing with limited flame spread
  • EN 343:2019, Protection against rain
  • EN ISO 388:2017 + EN ISO 13997, Partial test against mechanical risks, i.e. resistance to cuts and sharp objects
  • EN ISO 13688:2013, Protective clothing - General requirements
  • EN ISO 22610 + 22612, Protection against germs bacteria (tested when new)
  • ISO 16604, Protection against viruses

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44-L66/68

Care instructions

before and after washing instrcutions:

  • close zips, Velcro and button fasteners
  • empty and close pockets
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if the outer fabric is dark blue, use detergent for black clothes, if available)
  • do not use fabric softener
  • rinse out any detergent residues well
  • air dry if possible
  • do not staple on labels
  • re-impregnation (hydrophobic treatment recommended after every 5th wash (turn the garment inside out for this)

care symbols:

  • washing: gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • bleaching: bleaching not possible
  • drying: drying with reduced thermal stress
  • ironing: iron at moderate heat at 150°C (2 points) to refresh the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • dry cleaning: gentle cleaning with perchlorethylene

NTi® - 112 Allrounder jacket Art No. 112-160S-85

Material

Art No.112-160S-85:
outer fabric: Nomex® (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre) + 35% modacrylic/33% viscose FR/30% aramid (Kevlar®)/2% antistatic fibre (HI-VIS fluorescent yellow)
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nonwoven, Spunlace Nomex®/Kevlar® quilted with 100% Aramid
Segmented reflective striping FR: Yellow-silver-yellow
  • colour code (85): gold-luminescent-yellow

Article Description

  • Collars, colour-contrasting in HI-VIS fluorescent yellow
  • Napoleon pocket with fluorescent yellow zip
  • Two adjustable radio pockets (for digital and analogue equipment)
  • Lamp holder with safety catch positioned centrally for optimum light exposure
  • Adjustable arm strap
  • YKK® panic zip in fluorescent yellow, easily replaceable in the utility model-protected tunnel system
  • Inspection opening with access to membrane and insulation side on both sides
  • Segmented reflective tape, incl. reflective piping for optimal body contour recognition
  • Self-luminous back label with inscription FEUERWEHR (further inscription and second back label optional)
  • Signal Velcro fastener made of luminescent red/yellow Velcro tape; an improperly closed jacket is immediately recognisable
  • Tabs for antenna and equipment fixation
  • Two velcro straps for name tags or for tucker attachment
  • Ergonomic, pre-shaped elbow area, reinforced with silicone/ carbon/ Kevlar
  • Pockets and fasteners with non-slip trim for easy opening, even with gloves on
  • Carabiner hook
  • Suction barrier against wetness from creeping
  • Cuffs with Kevlar reinforcement at the sleeve hem and thumb loop

Standards/dimension tables/declarations of conformity

  • EN 469:2020 Section 6.2.6 + Performance level X1 Y2 Z2
  • EN 16689:2017, Protective clothing for technical assistance
  • ISO 15384:2018 + Amd. 1:2021-09, Protective clothing for firefighting in open areas
  • EN 1149-5:2018, Electrostatic properties
  • EN ISO 11612:2015, PPE for work exposed to heat
  • EN ISO 14116:2015, Protection against flames, materials, combination of materials and clothing with limited flame spread
  • EN 343:2019, Protection against rain
  • EN ISO 388:2017 + EN ISO 13997, Partial test against mechanical risks, i.e. resistance to cuts and sharp objects
  • EN ISO 13688:2013, Protective clothing - General requirements
  • EN ISO 22610 + 22612, Protection against germs bacteria (tested when new)
  • ISO 16604, Protection against viruses

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44-L66/68

Care instructions

before and after washing instrcutions:

  • close zips, Velcro and button fasteners
  • empty and close pockets
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if the outer fabric is dark blue, use detergent for black clothes, if available)
  • do not use fabric softener
  • rinse out any detergent residues well
  • air dry if possible
  • do not staple on labels
  • re-impregnation (hydrophobic treatment recommended after every 5th wash (turn the garment inside out for this)

care symbols:

  • washing: gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • bleaching: bleaching not possible
  • drying: drying with reduced thermal stress
  • ironing: iron at moderate heat at 150°C (2 points) to refresh the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • dry cleaning: gentle cleaning with perchlorethylene

NTi® - 112 Allrounder trousers Art No. 112-164S-85

Material

Art No.112-164S-85:
outer fabric: Nomex® (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre) + 35% modacrylic/33% viscose FR/30% aramid (Kevlar®)/2% antistatic fibre (HI-VIS fluorescent yellow)
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nonwoven, Spunlace Nomex®/Kevlar® quilted with 100% Aramid
Segmented reflective striping FR: Yellow-silver-yellow
  • Farbcode (85): gold-luminescent-yellow

Article Description

  • NTI® 112 trouser strap adjustment system with comfort quick adjustment.
  • Luminous yellow flaps for easy opening of the side pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-shaped knee area, reinforced with silicone/ carbon/ Kevlar
  • Suction barrier against wetness from creeping
  • Inspection opening with access to membrane and insulation side on both sides
  • Waistband closure with Velcro and zip
  • Two side pockets with pocket pouch
  • Knee pads FR, waterproof and replaceable
  • Segmented reflective striping, incl. reflective piping for optimal body contour recognition
  • Step recess with abrasion protection

Standards/dimension tables/declarations of conformity

  • EN 469:2020 Section 6.2.6 + Performance level X1 Y2 Z2
  • EN 16689:2017, Protective clothing for technical assistance
  • ISO 15384:2018 + Amd. 1:2021-09, Protective clothing for firefighting in open areas
  • EN 1149-5:2018, Electrostatic properties
  • EN ISO 11612:2015, PPE for work exposed to heat
  • EN ISO 14116:2015, Protection against flames, materials, combination of materials and clothing with limited flame spread
  • EN 343:2019, Protection against rain
  • EN ISO 388:2017 + EN ISO 13997, Partial test against mechanical risks, i.e. resistance to cuts and sharp objects
  • EN ISO 13688:2013, Protective clothing - General requirements
  • EN ISO 22610 + 22612, Protection against germs bacteria (tested when new)
  • ISO 16604, Protection against viruses

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44-L66/68

Care instructions

before and after washing instrcutions:

  • close zips, Velcro and button fasteners
  • empty and close pockets
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if the outer fabric is dark blue, use detergent for black clothes, if available)
  • do not use fabric softener
  • rinse out any detergent residues well
  • air dry if possible
  • do not staple on labels
  • re-impregnation (hydrophobic treatment recommended after every 5th wash (turn the garment inside out for this)

care symbols:

  • washing: gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • bleaching: bleaching not possible
  • drying: drying with reduced thermal stress
  • ironing: iron at moderate heat at 150°C (2 points) to refresh the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • dry cleaning: gentle cleaning with perchlorethylene