Standard Plus jacket

The issue of safety is of paramount importance in the area of forestry conservation. Many jobs require the protection of forestry workers from the various dangers encountered in forests and other areas of deployment. When working with a chainsaw, clothing is required that protects, is comfortable to wear and at the same time provides safety.

The new Standard Plus forestry jacket impresses with its modern design, while its ergonomic cut ensures a high degree of mobility.

Certifications:

KWF Standard

Standard Plus jacket Art No. 50-100

Material

Art No.50-100:

Upper material: Polyester/cotton

Upper material colour variants:

Article Description

  • Reflective piping for increased visibility
  • Breast pocket on the right for mobile phone with press stud fastener
  • Left breast pocket with zip
  • Extended back section with integrated first-aid bag
  • Patch side pockets with self-closing flaps
  • Sleeve with press studs for width adjustment
  • Ventilation opening in the back

360 degree view 360 degree view

Sizes Available

Sizes: 0-V

Care instructions

Pre- and post-treatment:

  • Pre-wash if heavily soiled
  • Pre-wash stains with soap by hand
  • Use standard detergent
  • No rinsing additives
  • No fabric softener
  • Rinse thoroughly
  • No tumble dryer
  • Hang dry
  • Do not steam iron

Care instructions:

  • Gentle cycle at a maximum temperature of 40° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Do not iron hot (1 point)
  • Do not dry clean

Pull the cut protection clothing into shape immediately after washing

IMPORTANT: Any form of cleaning that deviates from the instructions provided on the labelling can impair protection. If the cut protection insert is damaged, the garment is to be replaced immediately.

Please note: The trouser do not offer one hundred percent protection against injuries.

Safety recommendation of the accident insurance company: Replacement of cut protection trouser after a wearing time of a max. of 12-18 months (from date of purchase).

Standard Plus jacket Art No. 50-100

Material

Art No.50-100:

­Upper material: Polyester/cotton

Upper material colour variants:

Article Description

  • Reflective piping for increased visibility
  • Breast pocket on the right for mobile phone with press stud fastener
  • Left breast pocket with zip
  • Extended back section with integrated first-aid bag
  • Patch side pockets with self-closing flaps
  • Sleeve with press studs for width adjustment
  • Ventilation opening in the back

360 degree view 360 degree view

Sizes Available

Sizes: 0-V

Care instructions

Pre- and post-treatment:

  • Pre-wash if heavily soiled
  • Pre-wash stains with soap by hand
  • Use standard detergent
  • No rinsing additives
  • No fabric softener
  • Rinse thoroughly
  • No tumble dryer
  • Hang dry
  • Do not steam iron

Care instructions:

  • Gentle cycle at a maximum temperature of 40° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Do not iron hot (1 point)
  • Do not dry clean

Pull the cut protection clothing into shape immediately after washing

IMPORTANT: Any form of cleaning that deviates from the instructions provided on the labelling can impair protection. If the cut protection insert is damaged, the garment is to be replaced immediately.

Please note: The trouser do not offer one hundred percent protection against injuries.

Safety recommendation of the accident insurance company: Replacement of cut protection trouser after a wearing time of a max. of 12-18 months (from date of purchase).