Profi Flex bib pants

The issue of safety is of paramount importance in the area of forestry conservation. Many jobs require the protection of forestry workers from the various dangers encountered in forests and other areas of deployment. When working with a chainsaw, clothing is required that protects, is comfortable to wear and at the same time provides safety.

The new PROFI FLEX cut protection trouser is characterised by an increased wearing comfort. This is achieved through the combination of mono-elastic 2-way stretch and bi-elastic 4-way stretch inserts. The waterproof knee reinforcement also provides increased protection against thorns and other potential hazards.

Certifications:

Cut protection class 1
KWF Profi
Ökotex

Profi Flex bib pants Art No. 51-120

Material

Art No.51-120:

Upper material: Polyester/elastane (monoelastic 2-way stretch)
Lining: Polyester/cotton
Cut protection: Polyester/polypropylene

Article Description

  • Wide rubber braces with pin buckles
  • Breast pocket with waterproof PU zip
  • Left thigh pocket with waterproof PU zip
  • Back pocket with self-closing flap
  • Patch side pocket on the right for folding rule, pen and pad
  • Chainsaw key pocket with safety
  • Reinforced knees with special protection against thorns
  • Reflective piping for increased visibility
  • Coloured darts
  • Abrasion protection on the ankle with reflective piping
  • Ventilation openings on the rear trouser leg
  • Large gusset, high wearing comfort

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

Certified according to BS EN 381-2:1995, BS EN 381-5:1995; BS EN ISO 11393-2:2019 cut protection class 1 = 20m/s, Form A

Sizes Available

sizes: 44-64

Care instructions

Pre- and post-treatment machine wash:

  • Pre-wash if heavily soiled
  • Pre-wash stains with soap
  • Use standard detergent
  • Do not use any detergent additives
  • Do not use fabric softener
  • Rinse thoroughly
  • Hang dry
  • Do not steam iron

Care instructions:

  • Machine wash on a gentle cycle at a maximum temperature 60° C
  • Do not bleach
  • Do not tumble dry
  • Do not iron hot (1 point)
  • Do not dry clean

Pre- and post-treatment hand wash:

  • Pre-wash if heavily soiled
  • Use pure soap or a little standard detergent
  • Do not use any detergent additives
  • Do not use fabric softener
  • Rinse thoroughly
  • Hang dry
  • Do not steam iron

Care instructions:

  • Max. handwash temperature 40° C
  • Do not bleach
  • Do not tumble dry
  • Do not iron hot (1 point)
  • Do not dry clean

Pull the cut protection clothing into shape immediately after washing

IMPORTANT: Any form of cleaning that deviates from the instructions provided on the labelling can impair protection. If the cut protection insert is damaged, the garment is to be replaced immediately.

Please note: The trouser do not offer one hundred percent protection against injuries.

Safety recommendation by the accident insurance company: Replacement of cut protection trouser after a wearing time of a max. of 12-18 months (from date of purchase).

Profi Flex bib pants Art No. 51-120

Material

Upper material: Polyester/elastane (monoelastic 2-way stretch)
Lining material: Polyester/cotton
Cut protection: Polyester/polypropylene

Upper material colour variants:

Article Description

  • Wide rubber braces with pin buckles
  • Breast pocket with waterproof PU zip
  • Left thigh pocket with waterproof PU zip
  • Back pocket with self-closing flap
  • Patch side pocket on the right for folding rule, pen and pad
  • Chainsaw key pocket with safety
  • Reinforced knees with special protection against thorns
  • Reflective piping for increased visibility
  • Coloured darts
  • Abrasion protection on the ankle with reflective piping
  • Ventilation openings on the rear trouser leg
  • Large gusset, high wearing comfort

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

Certified according to BS EN 381-2:1995, BS EN 381-5:1995; BS EN ISO 11393-2:2019 cut protection class 1 = 20m/s, Form A

Sizes Available

Sizes: 44-64

Care instructions

Pre- and post-treatment machine wash:

  • Pre-wash if heavily soiled
  • Pre-wash stains with soap by hand
  • Use standard detergent
  • Do not use any detergent additives
  • Do not use fabric softener
  • Rinse thoroughly
  • Hang dry
  • Do not steam iron

Care instructions:

  • Machine wash on a gentle cycle at a maximum temperature 60° C
  • Do not bleach
  • Do not tumble dry
  • Do not iron hot (1 point)
  • Do not dry clean

Pre- and post-treatment hand wash:

  • Pre-wash if heavily soiled
  • Use pure soap or a little standard detergent
  • Do not use any detergent additives
  • Do not use fabric softener
  • Rinse thoroughly
  • Hang dry
  • Do not steam iron

Care instructions:

  • Max. handwash temperature 40° C
  • Do not bleach
  • Do not tumble dry
  • Do not iron hot (1 point)
  • Do not dry clean

Pull the cut protection clothing into shape immediately after washing

IMPORTANT: Any form of cleaning that deviates from the instructions provided on the labelling can impair protection. If the cut protection insert is damaged, the garment is to be replaced immediately.

Please note: The trouser do not offer one hundred percent protection against injuries.

Safety recommendation by the accident insurance company: Replacement of cut protection trouser after a wearing time of a max. of 12-18 months (from date of purchase).