TA tactical jackets

The TA protective suit "Technical Assistance" has been especially developed for technical rescue purposes.
This TA protective suit is highly visible. This is achieved through the use of HI-VIS upper materials in luminous orange, red or yellow in conjunction with the corresponding high-contrast reflective yellow/silver/yellow or red/silver/red stripes. In addition, the following functional equipment features are integrated in the TA protective suit:

  • Oil and water-repellent finish
  • Reflective tape based on HuPf Parts 1 and 4
  • Hi-vis vest exemption according to DGUV
  • Knee pre-shaped with darts and PU carbon knee reinforcement with inside pocket for optional knee pads

Cut and stab protection in the area of the forearms

Excerpt from detailed image 4: reinforced elbow area, cut and stab protection in the area of the forearms

Virus and bacterial protection (tested when new)/breathable and waterproof thanks to Airtex® membrane

Upper material:

Cotton/hi-vis polyester FR (Proban®), water-repellent due to FC finish (Teflon™)

Upper material colour variants:

TA tactical jacket Art No. 19-160-71

Material

Art No.19-160:

Outer fabric: 100% cotton FR (Proban®) outer fabric HI-VIS material: 50% cotton/50% polyester membrane: Knitted fabric, 100% polyester, PU coated inner lining: 100% cotton FR reflective tape: Yellow-silver-yellow, silver FR

  • colour code (71): Black-blue/luminous orange

Article Description

  • Additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • Collar, contrasting in colour in HI-VIS luminous orange, red or yellow
  • Reinforced elbow area
  • Integrated storm bar on the collar
  • Fitted radio pocket on the right with Velcro strip on the flap for name badge
  • Lamp holder
  • An patch radio pocket on the left with a flap
  • Antenna holder for handheld radios
  • Inspection opening for checking the membrane
  • Loop for snap-hook
  • Two fitted side pockets with flaps
  • Two inside pockets with YKK® metal zip
  • Hanging loop
  • Sewn-in label on the inside for writing the personal name
  • High wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • Incl. removable "FIRE BRIGADE" panel

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

N<b }ormal sizes = 40-68s<b }hort sizes = K42-K68l<b }ong sizes = L42-L68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use only colour detergent
  • Use only small amounts of detergent
  • Rinse out detergent residues thoroughly
  • Do not wash individually
  • Do not tumble dry
  • Iron on after washing

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Do not dry clean

TA tactical jacket Art No. 19-160-66

Material

Art No.19-160:

Outer fabric: 100% cotton FR (Proban®) outer fabric HI-VIS material: 50% cotton/50% polyester membrane: Knitted fabric, 100% polyester, PU coated inner lining: 100% cotton FR reflective tape: Yellow-silver-yellow, silver FR

  • colour code (66): Black-blue/luminous yellow

Article Description

  • Additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • Collar, contrasting in colour in HI-VIS luminous orange, red or yellow
  • Reinforced elbow area
  • Integrated storm bar on the collar
  • Fitted radio pocket on the right with Velcro strip on the flap for name badge
  • Lamp holder
  • An patch radio pocket on the left with a flap
  • Antenna holder for handheld radios
  • Inspection opening for checking the membrane
  • Loop for snap-hook
  • Two fitted side pockets with flaps
  • Two inside pockets with YKK® metal zip
  • Hanging loop
  • Sewn-in label on the inside for writing the personal name
  • High wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • Incl. removable "FIRE BRIGADE" panel

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

N<b }ormal sizes = 40-68s<b }hort sizes = K42-K68l<b }ong sizes = L42-L68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use only colour detergent
  • Use only small amounts of detergent
  • Rinse out detergent residues thoroughly
  • Do not wash individually
  • Do not tumble dry
  • Iron on after washing

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Do not dry clean

TA tactical jacket Art No. 19-170-69

Material

Art No.19-170:

Outer fabric: 100% cotton FR (Proban®) outer fabric HI-VIS material: 50% cotton/50% polyester membrane: Knitted fabric, 100% polyester, PU coated inner lining: 100% cotton FR reflective tape: Red-silver-red, silver FR

  • colour code (69): Black-blue/luminous red

Article Description

  • Additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • Collar, contrasting in colour in HI-VIS luminous orange, red or yellow
  • Reinforced elbow area
  • Integrated storm bar on the collar
  • Fitted radio pocket on the right with Velcro strip on the flap for name badge
  • Lamp holder
  • An patch radio pocket on the left with a flap
  • Antenna holder for handheld radios
  • Inspection opening for checking the membrane
  • Loop for snap-hook
  • Two fitted side pockets with flaps
  • Two inside pockets with YKK® metal zip
  • Hanging loop
  • Sewn-in label on the inside for writing the personal name
  • High wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • Incl. removable "FIRE BRIGADE" panel

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

N<b }ormal sizes = 40-68s<b }hort sizes = K42-K68l<b }ong sizes = L42-L68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use only colour detergent
  • Use only small amounts of detergent
  • Rinse out detergent residues thoroughly
  • Do not wash individually
  • Do not tumble dry
  • Iron on after washing

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Do not dry clean

TA tactical jacket Art No. 19-170-70

Material

Art No.19-170:

Outer fabric: 100% cotton FR (Proban®) outer fabric HI-VIS material: 50% cotton/50% polyester membrane: Knitted fabric, 100% polyester, PU coated inner lining: 100% cotton FR reflective tape: Red-silver-red, silver FR

  • colour code (70): Gold/luminous red

Article Description

  • Additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • Reinforced elbow area
  • Collar, contrasting in colour in HI-VIS luminous orange, red or yellow
  • Integrated storm bar on the collar
  • Fitted radio pocket on the right with Velcro strip on the flap for name badge
  • Lamp holder
  • An patch radio pocket on the left with a flap
  • Antenna holder for handheld radios
  • Inspection opening for checking the membrane
  • Loop for snap-hook
  • Two fitted side pockets with flaps
  • Two inside pockets with YKK® metal zip
  • Hanging loop
  • Sewn-in label on the inside for writing the personal name
  • High wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • Incl. removable "FIRE BRIGADE" panel

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

N<b }ormal sizes = 40-68s<b }hort sizes = K42-K68l<b }ong sizes = L42-L68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use only colour detergent
  • Use only small amounts of detergent
  • Rinse out detergent residues thoroughly
  • Do not wash individually
  • Do not tumble dry
  • Iron on after washing

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Do not dry clean

TA tactical jacket Art No. 19-150-01

Material

Art No.19-150:

Outer fabric: 100% cotton FR (Proban®)
membrane: Knitted fabric, 100% polyester, PU coated
lining: 100% cotton FR
reflective tape: Yellow-silver-yellow, silver FR

  • colour code (01): Black-blue

Article Description

  • Additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • Reinforced elbow area
  • Integrated storm bar on the collar
  • Fitted radio pocket on the right with Velcro strip on the flap for name badge
  • Lamp holder
  • A patch radio pocket on the left with a flap
  • Antenna holder for handheld radios
  • Inspection opening for checking the membrane
  • Loop for snap-hook
  • Two fitted side pockets with flaps
  • Two inside pockets with YKK® metal zip
  • Hanging loop
  • Sewn-in label on the inside for writing the personal name
  • High wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • Incl. removable "FIRE BRIGADE" panel

TA-orangesblack/index.html

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

N<b }ormal sizes = 40-68s<b }hort sizes = K42-K68l<b }ong sizes = L42-L68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use only colour detergent
  • Use only small amounts of detergent
  • Rinse out detergent residues thoroughly
  • Do not wash individually
  • Do not tumble dry
  • Iron on after washing

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Do not dry clean

TA tactical jacket Art No. 19-151-01

Material

Art No.19-151:

Outer fabric: 100% cotton FR (Proban®)
membrane: Knitted fabric, 100% polyester, PU coated
lining: 100% cotton FR
reflective tape: Red-silver-red, silver FR

  • colour code (01): Black-blue

Article Description

  • Additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • Reinforced elbow area
  • Integrated storm bar on the collar
  • Fitted radio pocket on the right with Velcro strip on the flap for name badge
  • Lamp holder
  • A patch radio pocket on the left with a flap
  • Antenna holder for handheld radios
  • Inspection opening for checking the membrane
  • Loop for snap-hook
  • Two fitted side pockets with flaps
  • Two inside pockets with YKK® metal zip
  • Hanging loop
  • Sewn-in label on the inside for writing the personal name
  • High wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • Incl. removable "FIRE BRIGADE" panel

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

N<b }ormal sizes = 40-68s<b }hort sizes = K42-K68l<b }ong sizes = L42-L68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use only colour detergent
  • Use only small amounts of detergent
  • Rinse out detergent residues thoroughly
  • Do not wash individually
  • Do not tumble dry
  • Iron on after washing

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Do not tumble dry
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Do not dry clean