protective jacket - Nomex/Sympatex DIN EN 469 Art No. 11-300

Material

Art No.11-300:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: 100% polyester knitted fabric with PES coating, Sympatex® membrane
thermal insulation/inner lining: Carbon fibre needle fleece quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (01): black-blue

Article Description

  • thermal insulation right through to the front panel
  • wide front panel with Velcro fastener
  • panic zip
  • fitted radio pocket on left side of chest, adjustable at two heights, with securing Velcro strap
  • pocket pouches and flaps with functional membrane
  • patch-style inside pocket with Velcro fastener
  • large turn-down collar with Velcro width adjustment
  • large arm movement wedge with complete functional structure, also in the thermal insulation layers
  • moisture barrier in the jacket hem
  • oil and water-repellent finish
  • washing and cleaning resistant
  • detachable fluorescent, neon yellow "FIRE BRIGADE" rear label
  • hanging loop
  • Velcro fastening for width-adjustment of sleeves
  • knitted cuffs with thumb loops

All protective jackets, including the short versions, are approved with all Novotex Isomat protective pants.

Standards/dimension tables/declarations of conformity

certified according to DIN EN 469:2005 + A1:2006 + AC:2006 classes: Xf2 Xr2 Y2 Z2

Sizes Available

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

protective jacket - Nomex/Airtex® (red) DIN EN 469 Art No. 19-666 Kurzversion

Material

Art No.19-666:

outer fabric: Nomex® (93% meta-aramid (Nomex®)/5% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: 100% polyester knitted fabric with PU coating, AirtexS® membrane
thermal insulation/inner lining: Carbon fibre needle fleece quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (10): red

Article Description

  • thermal insulation right through to the front panel
  • wide front panel with Velcro fastener
  • panic zip
  • fitted radio pocket on left side of chest, adjustable at two heights, with securing Velcro strap
  • pocket pouches and flaps with functional membrane
  • patch-style inside pocket with Velcro fastener
  • large turn-down collar with Velcro width adjustment
  • large arm movement wedge with complete functional structure, also in the thermal insulation layers
  • moisture barrier in the jacket hem
  • oil and water-repellent finish
  • washing and cleaning resistant
  • detachable fluorescent, neon yellow "FIRE BRIGADE" rear label
  • hanging loop
  • Velcro fastening for width-adjustment of sleeves
  • knitted cuffs with thumb loops

All protective jackets, including the short versions, are approved with all Novotex Isomat protective pants.

Standards/dimension tables/declarations of conformity

certified according to DIN EN 469:2005 + A1:2006 + AC:2006 classes: Xf2 Xr2 Y2 Z2

Sizes Available

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene