NTi® - 112 Model 1 - protective jacket

NTi®-112 Model 1 Premium firefighter overgarment according to EN 469:2005+A1:2006+AC:2006 + levels Xf2/Xr2/Y2/Z2 and according to the German HuPF execution standard for selected colours.

NTi®-112 Model 1 offers the greatest possible protection for firefighters. Tested with 0 burns after 30 washes on the Thermo-Man®.

  • BS EN 469 and HuPF (specific colours)
  • Perfect fit - body contour design
  • Hi-vis vest exempt according to DGUV
  • Thermo-Man® tested
  • Super breathable - RET 13.5 PA/W
  • Protection against germs and bacteria according to BS EN ISO 22610 + 22612
  • Protection against viruses according to BS ISO 16604

Upper material:

Nomex Outershell Tough

Upper material colour variants:

NTi® - 112 Model 1 - protective jacket Art No. 112-100-01 / 112100H-01

Material

Art No.112-100:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (01): black-blue

Article Description

  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1
  • self-luminous back label "FIRE BRIGADE" (optional further labelling and/or second back label)
  • signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • reflex piping for body contour recognition
  • tabs for attaching antennas and devices
  • two fleece straps for name tags or for attaching collars
  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fasteners with non-slip trimmings for easy opening, even when wearing gloves
  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI protective jackets also fulfil annex B EN 469 (hi-vis vest exemption) without the pants.

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44-L66/68

 

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 1 - protective pants Art No. 112-300-01 / 112300H-01

Material

Art No.112-300:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (01): black-blue

Article Description

  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flaps for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouch
  • reflective piping on the side pockets
  • kneepad FR, waterproof and exchangeable
  • reflective tape based on HuPF part 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-300 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 - protective jacket Art No. 112-100-05 / 112100H-05

Material

Art No.112-100:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (05): orange

Article Description

  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK®-panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1
  • self-luminous back label "FIRE BRIGADE" (optional further labelling and/or second back label)
  • signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • reflex piping for body contour recognition
  • tabs for attaching antennas and devices
  • two fleece straps for name tags or for attaching collars
  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fasteners with non-slip trimmings for easy opening, even when wearing gloves
  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI protective jackets also fulfil annex B EN 469 (hi-vis vest exemption) without the pants.

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 1 - protective pants Art No. 112-300-05 / 112300H-05

Material

Art No.112-300:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (05): orange

Article Description

  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flaps for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouch
  • reflective piping on the side pockets
  • kneepad FR, waterproof and exchangeable
  • reflective tape based on HuPF part 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-300 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 - protective jacket Art No. 112-100-09 / 112100H-09

Material

Art No.112-100:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (09): gold

Article Description

  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1
  • self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • reflex piping for body contour recognition
  • tabs for attaching antennas and devices
  • two fleece straps for name tags or for attaching collars
  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fasteners with non-slip trimmings for easy opening, even when wearing gloves
  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI protective jackets also fulfil annex B EN 469 (hi-vis vest exemption) without the pants.

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate temperature at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 1 - protective pants Art No. 112-300-09 / 112300H-09

Material

Art No.112-300:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (09): gold

Article Description

  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flaps for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouch
  • reflective piping on the side pockets
  • kneepad FR, waterproof and exchangeable
  • reflective tape based on HuPF part 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-300 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

Matching Articles

NTi®-112 "Model 1" protective jacket 112-100/112100H (gold) "click here"

NTi®-112 "Model 1" protective jacket 112-100/112100H (black blue/gold) "click here"

NTi® - 112 Model 1 - protective jacket Art No. 112-100-10

Material

Art No.112-100:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (10): red

Article Description

  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1
  • self-luminous back label "FIRE BRIGADE" (optional further labelling and/or second back label)
  • signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • reflex piping for body contour recognition
  • tabs for attaching antennas and devices
  • two fleece straps for name tags or for attaching collars
  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fasteners with non-slip trimmings for easy opening, even when wearing gloves
  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI protective jackets also fulfil annex B EN 469 (hi-vis vest exemption) without the pants.

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivates the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 1 - protective pants Art No. 112-300-10

Material

Art No.112-300:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (10): red

Article Description

  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flaps for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouch
  • reflective piping on the side pockets
  • kneepad FR, waterproof and exchangeable
  • reflective tape based on HuPF part 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-300 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 - protective jacket Art No. 112-100-63

Material

Art No.112-100:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (63): black-blue/red

Article Description

  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1
  • self-luminous back label "FIRE BRIGADE" (optional further labelling and/or second back label)
  • signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • reflex piping for body contour recognition
  • tabs for attaching antennas and devices
  • two fleece straps for name tags or for attaching collars
  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fasteners with non-slip trimmings for easy opening, even when wearing gloves
  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI protective jackets also fulfil annex B EN 469 (hi-vis vest exemption) without the pants.

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 - protective jacket Art No. 112-100-64 / 112100H-64

Material

Art No.112-100:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (64): black-blue/gold

Article Description

  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1
  • self-luminous back label "FIRE BRIGADE" (optional further labelling and/or second back label)
  • signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • reflex piping for body contour recognition
  • tabs for attaching antennas and devices
  • two fleece straps for name tags or for attaching collars
  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fasteners with non-slip trimmings for easy opening, even when wearing gloves
  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI protective jackets also fulfil annex B EN 469 (hi-vis vest exemption) without the pants.

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 - protective jacket Art No. 112-100-65 / 112100H-65

Material

Art No.112-100:

outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (65): black-blue/orange

Article Description

  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1
  • self-luminous back label "FIRE BRIGADE" (optional further labelling and/or second back label)
  • signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • reflex piping for body contour recognition
  • tabs for attaching antennas and devices
  • two fleece straps for name tags or for attaching collars
  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fasteners with non-slip trimmings for easy opening, even when wearing gloves
  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to DIN EN 469:2005 + A1:2006 + AC:2006

classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI protective jackets also fulfil annex B EN 469 (hi-vis vest exemption) without the pants.

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene