NTi® - 112 Model 1 overcoat

NTi®-112 Model 1 Premium firefighter overgarment according to EN 469:2005+A1:2006+AC:2006 + levels Xf2/Xr2/Y2/Z2 and according to the German HuPF execution standard for selected colours.

NTi®-112 Model 1 offers the greatest possible protection for firefighters. Tested with 0 burns after 30 washes on the Thermo-Man®.

  • BS EN 469 and HuPF (specific colours)
  • Perfect fit - body contour design
  • Hi-vis vest exempt according to DGUV
  • Thermo-Man® tested
  • Super breathable - RET 13.5 PA/W
  • Protection against germs and bacteria according to BS EN ISO 22610 + 22612
  • Protection against viruses according to BS ISO 16604

Upper material:

Nomex Outershell Tough

Upper material colour variants:

NTi® - 112 Model 1 overcoat Art No. 112-100-01 / 112100H-01

Material

Art No.112-100:

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (01): Black-blue

Art No.112100H (HuPF):

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (01): Black-blue

Article Description

  • Shoulder padding for breathing apparatus
  • Napoleon pocket with luminous yellow zip
  • Two adjustable radio pockets (digital/analogue)
  • Lamp holder with safety snap-hook
  • Adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • Inspection opening with access from both sides to the membrane and insulation side
  • Reflective tape based on HuPF Part 1
  • Self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • Signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • Reflex piping for body contour recognition
  • Tabs for attaching antennas and devices
  • Two fleece straps for name tags or for attaching a collar
  • Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • Pockets and fasteners with non-slip trimmings for easy opening, even gloves
  • Snap-hook
  • Moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to BS EN 469:2005 + A1:2006 + AC:2006

  • 112100H <b } certified according to BS EN 469:2005 + A1:2006 + AC:2006 and HuPF 08/17

Classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI overcoats also fulfil Annex B EN469 (hi-vis vest exemption) without the trouser.

Sizes Available

Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68l<b }ong sizes: L42/44-L66/68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 overcoat Art No. 112-100-05 / 112100H-05

Material

Art No.112-100:

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (05): Orange

Art No.112100H (HuPF):

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR

  • colour code (05): Orange

Article Description

  • Shoulder padding for breathing apparatus
  • Napoleon pocket with luminous yellow zip
  • Two adjustable radio pockets (digital/analogue)
  • Lamp holder with safety snap-hook
  • Adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • Inspection opening with access from both sides to the membrane and insulation side
  • Reflective tape based on HuPF Part 1
  • Self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • Signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • Reflex piping for body contour recognition
  • Tabs for attaching antennas and devices
  • Two fleece straps for name tags or for attaching a collar
  • Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • Pockets and fasteners with non-slip trimmings for easy opening, even gloves
  • Snap-hook
  • Moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to BS EN 469:2005 + A1:2006 + AC:2006

  • 112100H <b } certified according to BS EN 469:2005 + A1:2006 + AC:2006 and HuPF 08/17

Classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI overcoats also fulfil Annex B EN469 (hi-vis vest exemption) without the trouser.

Sizes Available

Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68l<b }ong sizes: L42/44-L66/68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 overcoat Art No. 112-100-09 / 112100H-09

Material

Art No.112-100:

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (09): Gold

Art No.112100H (HuPF):

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (09): Gold

Article Description

  • Shoulder padding for breathing apparatus
  • Napoleon pocket with luminous yellow zip
  • Two adjustable radio pockets (digital/analogue)
  • Lamp holder with safety snap-hook
  • Adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • Inspection opening with access from both sides to the membrane and insulation side
  • Reflective tape based on HuPF Part 1
  • Self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • Signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • Reflex piping for body contour recognition
  • Tabs for attaching antennas and devices
  • Two fleece straps for name tags or for attaching a collar
  • Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • Pockets and fasteners with non-slip trimmings for easy opening, even gloves
  • Snap-hook
  • Moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to BS EN 469:2005 + A1:2006 + AC:2006

  • 112100H <b } certified according to BS EN 469:2005 + A1:2006 + AC:2006 and HuPF 08/17

Classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI overcoats also fulfil Annex B EN469 (hi-vis vest exemption) without the trouser.

Sizes Available

Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68l<b }ong sizes: L42/44-L66/68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 overcoat Art No. 112-100-10

Material

Art No.112-100:

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (10): Red

Article Description

  • Shoulder padding for breathing apparatus
  • Napoleon pocket with luminous yellow zip
  • Two adjustable radio pockets (digital/analogue)
  • Lamp holder with safety snap-hook
  • Adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • Inspection opening with access from both sides to the membrane and insulation side
  • Reflective tape based on HuPF Part 1
  • Self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • Signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • Reflex piping for body contour recognition
  • Tabs for attaching antennas and devices
  • Two fleece straps for name tags or for attaching a collar
  • Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • Pockets and fasteners with non-slip trimmings for easy opening, even gloves
  • Snap-hook
  • Moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to BS EN 469:2005 + A1:2006 + AC:2006

Classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI overcoats also fulfil Annex B EN469 (hi-vis vest exemption) without the trouser.

Sizes Available

Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68l<b }ong sizes: L42/44-L66/68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 overcoat Art No. 112-100-64 / 112100H-64

Material

Art No.112-100:

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (64): Black-blue/gold

Art No.112100H (HuPF):

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (64): Black-blue/gold

Article Description

  • Shoulder padding for breathing apparatus
  • Napoleon pocket with luminous yellow zip
  • Two adjustable radio pockets (digital/analogue)
  • Lamp holder with safety snap-hook
  • Adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • Inspection opening with access from both sides to the membrane and insulation side
  • Reflective tape based on HuPF Part 1
  • Self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • Signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • Reflex piping for body contour recognition
  • Tabs for attaching antennas and devices
  • Two fleece straps for name tags or for attaching a collar
  • Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • Pockets and fasteners with non-slip trimmings for easy opening, even gloves
  • Snap-hook
  • Moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to BS EN 469:2005 + A1:2006 + AC:2006

  • 112100H <b } certified according to BS EN 469:2005 + A1:2006 + AC:2006 and HuPF 08/17

Classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI overcoats also fulfil Annex B EN469 (hi-vis vest exemption) without the trouser.

Sizes Available

Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68l<b }ong sizes: L42/44-L66/68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 overcoat Art No. 112-100-63

Material

Art No.112-100:

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (63): Black-blue/red

Article Description

  • Shoulder padding for breathing apparatus
  • Napoleon pocket with luminous yellow zip
  • Two adjustable radio pockets (digital/analogue)
  • Lamp holder with safety snap-hook
  • Adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • Inspection opening with access from both sides to the membrane and insulation side
  • Reflective tape based on HuPF Part 1
  • Self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • Signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • Reflex piping for body contour recognition
  • Tabs for attaching antennas and devices
  • Two fleece straps for name tags or for attaching a collar
  • Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • Pockets and fasteners with non-slip trimmings for easy opening, even gloves
  • Snap-hook
  • Moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to BS EN 469:2005 + A1:2006 + AC:2006

Classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI overcoats also fulfil Annex B EN469 (hi-vis vest exemption) without the trouser.

Sizes Available

Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68l<b }ong sizes: L42/44-L66/68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi® - 112 Model 1 overcoat Art No. 112-100-65 / 112100H-65

Material

Art No.112-100:

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (65): Black-blue/orange

Art No.112100H (HuPF):

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fibre)
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (65): Black-blue/orange

Article Description

  • Shoulder padding for breathing apparatus
  • Napoleon pocket with luminous yellow zip
  • Two adjustable radio pockets (digital/analogue)
  • Lamp holder with safety snap-hook
  • Adjustable arm strap
  • YKK®-Panic zip in luminous yellow, easily exchangeable in the utility model protected tunnel system
  • Inspection opening with access from both sides to the membrane and insulation side
  • Reflective tape based on HuPF Part 1
  • Self-luminous spine label with FIRE BRIGADE label (additional label and second spine label optional)
  • Signal Velcro fastener made of a luminous red Velcro stripe – an incorrectly closed jacket is immediately recognisable
  • Reflex piping for body contour recognition
  • Tabs for attaching antennas and devices
  • Two fleece straps for name tags or for attaching a collar
  • Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • Pockets and fasteners with non-slip trimmings for easy opening, even gloves
  • Snap-hook
  • Moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-100 certified according to BS EN 469:2005 + A1:2006 + AC:2006

  • 112100H <b } certified according to BS EN 469:2005 + A1:2006 + AC:2006 and HuPF 08/17

Classes: Xf2 Xr2 Y2 Z2

The stripes on the NTI overcoats also fulfil Annex B EN469 (hi-vis vest exemption) without the trouser.

Sizes Available

Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68l<b }ong sizes: L42/44-L66/68

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Remove snap-hook
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene