NTi® - 112 Model 2 - protective jacket

NTi®-112 Model 2 Premium firefighter protective suit according to EN 469:2020 section 6.2.6 (visibility) + levels X2/Y2/Z2 aims to provide the highest possible protection for firefighters.

  • excellent enduring appearance after-washing, only very slight amount of bleeding or fibrillation of the outer fabric
  • high visibility of the body contours in dark and light surroundings
    "3-in-1 reflective piping" means: fluorescent, retro-reflective
    and luminescent function (even without lighting)

  • dot structure on the outer fabric provides for individual, attractive design,
    "3-in-1 reflective piping", etc.

  • re-impregnation only required after 40 washes, i.e. no impairment
    of the membrane and inner lining property after washing;
    wash-resistant FC finish (Power Shell impregnation)

  • high tear resistance
  • perfect fit
  • hi-vis vest exemption according to DGUV
  • the HuPF stripes on the NTi® Jacket 112-200 comply with
    EN 469:2020, section 6.2.6 (visibility), even without the trouser

  • reflective tape based on HuPF part 1 + 4
  • protection against germs and bacteria according to EN ISO 22610 + 22612
  • protection against viruses according to ISO 16604
  • high breathability - RET 12.7 P/W
  • RFID/NFC chip, position of each behind the NTi logo

Upper material:

Nomex

Upper material colour variants:

NTi®-112 Model 2 - protective pants Art No. 112-410-09

Material

Art No.112-400:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: red-silver-red

  • colour code (09): gold

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flap for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouches
  • kneepads FR, waterproof, and exchangeable
  • reflective tape based on HuPF part 1 + 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 - protective pants Art No. 112-410-01

Material

Art No.112-400:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: red-silver-red

  • colour code (01): black-blue

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flap for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouches
  • kneepads FR, waterproof, and exchangeable
  • reflective tape based on HuPF part 1 + 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing treatment:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 - protective pants Art No. 112-400-10

Material

Art No.112-400:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (10): red

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flap for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouches
  • kneepads FR, waterproof, and exchangeable
  • reflective tape based on HuPF part 1 + 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 - protective pants Art No. 112-400-09

Material

Art No.112-400:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (09): gold

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flap for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouches
  • kneepads FR, waterproof, and exchangeable
  • reflective tape based on HuPF part 1 + 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 - protective pants Art No. 112-400-05

Material

Art No.112-400:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (05): orange

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flap for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouches
  • kneepads FR, waterproof, and exchangeable
  • reflective tape based on HuPF part 1 + 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing treatment:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 - protective pants Art No. 112-400-01

Material

Art No.112-400:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (01): black-blue

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • new type of system for adjusting braces with quick and easy adjustment
  • luminous yellow flap for easy to open pockets
  • two bellows pockets (right with knife pocket)
  • ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • moisture barrier against creeping wetness
  • inspection opening with access from both sides to the membrane and insulation side
  • waistband closure with Velcro and zip fastener
  • two side pockets with pouches
  • kneepads FR, waterproof, and exchangeable
  • reflective tape based on HuPF part 1 + 4
  • step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

Sizes Available

normal sizes: 00-V short sizes: K00-KV long sizes: L00-LV

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-200-01

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (01): black-blue

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTi® jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (pull clothes inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-210-01

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: red-silver-red

  • colour code (01): black-blue

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44-L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-200-05

Material

Art No. 112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (05): orange

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron moderately hot at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-200-09

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (09): gold

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron moderately hot at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-200-10

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (10): red

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron moderately hot at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-200-63

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (63): black-blue/red

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron moderately hot at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-200-64

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (64): black-blue/gold

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron moderately hot at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-210-64

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: red-silver-red

  • colour code (65): black-blue/gold

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron moderately hot at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene

NTi® - 112 Model 2 - protective jacket Art No. 112-200-65

Material

Art No.112-200:

outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: yellow-silver-yellow

  • colour code (65): black-blue/orange

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • shoulder padding for breathing apparatus
  • napoleon pocket with luminous yellow zip
  • two adjustable radio pockets (digital/analogue)
  • lamp holder with safety snap-hook
  • adjustable arm strap
  • YKK® panic zip in luminous yellow, easily exchangeable into
    utility model protected tunnel system

  • inspection opening with access from both sides to the membrane and insulation side
  • reflective tape based on HuPF part 1 + 4
  • self-luminous back label "FIRE BRIGADE"
    (optional further labelling and/or second back label)

  • signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed
  • tabs for attaching antennas and devices, two fleece straps
    for name badges or for attaching collars

  • ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar
  • pockets and fastening with non-slip trimmings for easy opening
    even when wearing gloves

  • snap-hook
  • moisture barrier against creeping wetness

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2

The HuPF stripes on the NTI jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).

Sizes Available

normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 - L66/68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes)
  • do not use fabric softener
  • do not use bleach
  • rinse out detergent residues thoroughly
  • air dry if possible
  • do not staple on labels
  • re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process))

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • drying with reduced thermal stress
  • iron moderately hot at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • gentle dry cleaning with perchlorethylene