NTi®-112 Model 2 Overtrouser

NTi®-112 Model 2 Premium firefighter overgarment according to EN 469:2020 Section 6.2.6 (Visibility) + Levels X2/Y2/Z2 aims to provide the highest possible protection for firefighters.

  • Excellent permanent after-wash appearance, only very slight amount of bleeding or fibrillation of the outer fabric
  • High visibility of the body contours in dark and light surroundings
    "3 -in-1 reflective piping" means: fluorescent, retro-reflective
    and luminescent function (even without lighting)

  • Dot structure on the outer fabric provides for individual, attractive design,
    "3 in 1 reflective piping", etc.

  • Re-impregnation only required after 40 washes, i.e. no impairment
    of the membrane and inner lining property after washing.
    Wash-resistant FC finish (Power Shell impregnation)

  • High tear resistance
  • Perfect fit
  • Safety vest exemption according to DGUV
  • The HuPF stripes on the NTi® Jacket 112-200 complies with
    the trouser comply with EN 469:2020, Section 6.2.6 (Visibility)

  • Reflective tape based on HuPF Part 1 + 4
  • Protection against germs and bacteria according to BS EN ISO 22610 + 22612
  • Protection against viruses according to BS ISO 16604
  • High breathability - RET 12.7 P/W
  • RFID/NFC chip, position of each behind the NTi logo

Upper material:

Nomex

Upper material colour variants:

NTi®-112 Model 2 Overtrouser Art No. 112-400-01

Material

Art No.112-400:

Outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (01): Black-blue

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • New type of system for adjusting braces with quick and easy adjustment
  • Luminous yellow flap for easy to open pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • Moisture barrier against creeping wetness
  • Inspection opening with access from both sides to the membrane and insulation side
  • Waistband closure with Velcro and zip fastener
  • Two side pockets with pouches
  • Kneepads FR, waterproof, and exchangeable
  • Reflective tape based on HuPF Part 1 + 4
  • Step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to EN 469:2020 Sec. 6.2.6 + Levels X2/Y2/Z2

Sizes Available

Normal sizes: 00-V short sizes: K00-KV Long sizes L00-LV

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 Overtrouser Art No. 112-400-01

Material

Art No.112-400:

Outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Red-silver-red

  • colour code (01): Black-blue

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • New type of system for adjusting braces with quick and easy adjustment
  • Luminous yellow flap for easy to open pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • Moisture barrier against creeping wetness
  • Inspection opening with access from both sides to the membrane and insulation side
  • Waistband closure with Velcro and zip fastener
  • Two side pockets with pouches
  • Kneepads FR, waterproof, and exchangeable
  • Reflective tape based on HuPF Part 1 + 4
  • Step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to EN 469:2020 Sec. 6.2.6 + Levels X2/Y2/Z2

Sizes Available

Normal sizes: 00-V short sizes: K00-KV Long sizes L00-LV

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 Overtrouser Art No. 112-400-05

Material

Art No.112-400:

Outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (05): Orange

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • New type of system for adjusting braces with quick and easy adjustment
  • Luminous yellow flap for easy to open pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • Moisture barrier against creeping wetness
  • Inspection opening with access from both sides to the membrane and insulation side
  • Waistband closure with Velcro and zip fastener
  • Two side pockets with pouches
  • Kneepads FR, waterproof, and exchangeable
  • Reflective tape based on HuPF Part 1 + 4
  • Step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to EN 469:2020 Sec. 6.2.6 + Levels X2/Y2/Z2

Sizes Available

Normal sizes: 00-V short sizes: K00-KV Long sizes L00-LV

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 Overtrouser Art No. 112-400-09

Material

Art No.112-400:

Outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (09): Gold

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • New type of system for adjusting braces with quick and easy adjustment
  • Luminous yellow flap for easy to open pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • Moisture barrier against creeping wetness
  • Inspection opening with access from both sides to the membrane and insulation side
  • Waistband closure with Velcro and zip fastener
  • Two side pockets with pouches
  • Kneepads FR, waterproof, and exchangeable
  • Reflective tape based on HuPF Part 1 + 4
  • Step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to EN 469:2020 Sec. 6.2.6 + Levels X2/Y2/Z2

Sizes Available

Normal sizes: 00-V short sizes: K00-KV Long sizes L00-LV

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 Overtrouser Art No. 112-400-09

Material

Art No.112-400:

Outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Red-silver-red

  • colour code (09): Gold

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • New type of system for adjusting braces with quick and easy adjustment
  • Luminous yellow flap for easy to open pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • Moisture barrier against creeping wetness
  • Inspection opening with access from both sides to the membrane and insulation side
  • Waistband closure with Velcro and zip fastener
  • Two side pockets with pouches
  • Kneepads FR, waterproof, and exchangeable
  • Reflective tape based on HuPF Part 1 + 4
  • Step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to EN 469:2020 Sec. 6.2.6 + Levels X2/Y2/Z2

Sizes Available

Normal sizes: 00-V short sizes: K00-KV Long sizes L00-LV

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene

NTi®-112 Model 2 Overtrouser Art No. 112-400-10

Material

Art No.112-400:

Outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre
moisture barrier: General Electric® ePTFE membrane with GE® Direct Diffusion Technology
thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR
reflective tape: Yellow-silver-yellow

  • colour code (10): Red

Article Description

  • "3-in-1" reflective piping for optimal body contour recognition
  • New type of system for adjusting braces with quick and easy adjustment
  • Luminous yellow flap for easy to open pockets
  • Two bellows pockets (right with knife pocket)
  • Ergonomically pre-formed knee area, reinforced with silicone/carbon/Kevlar
  • Moisture barrier against creeping wetness
  • Inspection opening with access from both sides to the membrane and insulation side
  • Waistband closure with Velcro and zip fastener
  • Two side pockets with pouches
  • Kneepads FR, waterproof, and exchangeable
  • Reflective tape based on HuPF Part 1 + 4
  • Step recess with abrasion protection and adjustable leg bar (optional)

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • 112-400 certified according to EN 469:2020 Sec. 6.2.6 + Levels X2/Y2/Z2

Sizes Available

Normal sizes: 00-V short sizes: K00-KV Long sizes L00-LV

Care instructions

Pre- and post-treatment:

  • Empty pockets
  • Close zips, Velcro and button fasteners
  • Turn clothing inside out (lining facing outwards)
  • Use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black washing).
  • Do not use fabric softener
  • Do not use bleach
  • Rinse out detergent residues thoroughly
  • Air dry if possible
  • Do not staple on labels
  • Re-impregnation only required after 40 washes (then recommended after every 5th wash (turn clothing inside out again for this process)

Care instructions:

  • Gentle cycle at a maximum temperature of 60° C, normal mechanics, normal rinsing, normal spinning
  • Do not bleach
  • Drying with reduced thermal stress
  • Iron moderately hot at 150° C (2 points). This reactivates the outer fabric's water and dirt-repellent finish. Do not iron over the reflective stripes
  • Gentle dry cleaning with perchlorethylene